ANYCUBIC  |  Produkt ID: 5905156104648

Anycubic AirPure 2.0 luftrensningsanordning

Vejl. udsalgspris 759,00 kr
inkl. moms Levering beregnes ved kassen.
På fjernlager
Levering


Betalingsmetoder

Vi tilbyder flere sikre betalingsmuligheder, så du nemt kan vælge den, der passer dig bedst:

MobilePay – Betal hurtigt og sikkert med din mobil.
Kreditkort – Vi accepterer VISA, Mastercard og Dankort.
ViaBill – Køb nu, betal senere med fleksible afbetalingsmuligheder.

Levering eller afhentning

Bestil nemt – vælg levering eller afhentning i Vordingborg

Køb dit produkt hos os og vælg den leveringsmetode, der passer dig bedst:

🚚 Hurtig levering – Få din ordre leveret direkte til din adresse eller nærmeste pakkeshop. Vi samarbejder med pålidelige fragtfirmaer for sikker og hurtig levering.

📍 Lokal afhentning i Vordingborg – Ønsker du at spare fragttiden? Vælg lokal afhentning, og hent din ordre direkte hos os i Vordingborg. Vi sender en besked, så snart din vare er klar til afhentning.

Uanset om du vælger levering eller afhentning, sørger vi for en nem og problemfri shoppingoplevelse.

14 dages returret

Klik her for hurtigt at bestille en returlabel

Nem og enkel retur inden for 14 dage

Vi ønsker, at du skal være tilfreds med dit køb. Hvis du fortryder dit køb, har du mulighed for at returnere din vare inden for 14 dage efter modtagelse.

For at varen kan returneres, skal den være i samme stand som ved modtagelsen – ubrugt, med eventuelle mærker påsat og i original emballage.

Kontakt os, hvis du ønsker at starte en returnering, så guider vi dig gennem processen. Vi gør det nemt og problemfrit for dig.

Beskrivelse

Anycubic AirPure 2.0 Air Purifier


The Anycubic AirPure 2.0 air purifier is a compact ventilation system for 3D printers that operates continuously and effectively removes fumes and gases from the build chamber. The device offers an airflow rate of 49.86 CFM, allowing it to quickly vent contaminants outside. With a power supply range of 100–240 V and low power consumption of approximately 12 W, the unit is energy-efficient and convenient for everyday use. A noise level of approximately 45 dB allows for extended operation without significant discomfort. This model is compatible with, among others, the Photon P1 printer and can support one or two printers simultaneously, though in some configurations it requires additional components or their printing.



Flexible ventilation tube connected to a 3D printer and routed out through a window

Constant ventilation and comfortable operation


AirPure 2.0 runs continuously once started, constantly removing contaminated air from inside the printer. This solution reduces the buildup of fumes and improves indoor air quality. This is particularly important during long-duration prints, where odor emissions are more intense. As a result, using the printer becomes more comfortable and less of a nuisance.



Two 3D printers placed side by side on a table, both connected to the ventilation system

Performance and energy efficiency


With a performance of nearly 50 CFM, the device quickly removes air from the working chamber. At the same time, low power consumption of approximately 12 W helps reduce energy usage during continuous operation. This allows the system to be left on for many hours without any issues. The constant airflow also supports stable operating conditions for the printer.



3D printer connected to a ventilation tube leading to the wall next to a window

Mounting and installation requirements


AirPure 2.0 can be mounted near a ventilation opening or in a window, depending on available space. For different types of windows, additional mounting components may be required, which are not always included in the kit. For casement windows, separate sealing accessories are required. It is also important to consider the diameter of the pipes, which is typically around 60–80 mm, to properly prepare the installation site.



Rear of the device with a flexible ventilation tube connected


Included in the package


  • Main unit
  • Exhaust hose
  • Intake hose
  • Clamp
  • Power adapter
  • User manual


 







Manufacturer Anycubic
Model AirPure 2.0
Compatibility Photon P1
Rated voltage 100–240 V, 50/60 Hz
Output power 12V / 1A
Fan speed 3800 (±10%) RPM
Noise level 45 ±3 dB
Operating range 8–40°C, humidity 20–90%

Betaling og Sikkerhed

Betalingmetoder

  • American Express
  • Apple Pay
  • Google Pay
  • Klarna
  • Maestro
  • Mastercard
  • MobilePay
  • Shop Pay
  • Union Pay
  • Visa

Dine betalingsoplysninger behandles sikkert. Vi gemmer ikke kreditkortoplysninger og har heller ikke adgang til dine kreditkortoplysninger.

Produktdata er baseret på producentoplysninger og eksterne kilder. ITFON kan ikke holdes ansvarlig for eventuelle fejl eller unøjagtigheder.

Scansonic PA8001 DAB+ radio med trådløs oplader

Køb din i dag

Scansonic PA8001 DAB+ radio med trådløs oplader

ITFON, siden 2015.

Her finder du alt fra hvidevarer til pc'er – og vi har endda vores eget værksted til reparationer. Vores IT-specialiserede værksted har over 10 års erfaring med mobiltelefoner, tablets og computere